Eurogel Gel Coats

Eurogel GCP / GCTC 500 Series Iso-modified

Applications : Industrial, Transportation, Building, General purpose. Standard quality gelcoat, with stable storage and application properties. Good protection for polyester laminates under outdoor conditions. Answer all demanding process requirements.

Reference

Eurogel GCP-512
Eurogel GCP-522
Eurogel GCP-512
AD(auto-demoulant)
Eurogel GCTC-512
Eurogel GCTC-511
Eurogel GCTC-522
Eurogel GCTC-521

Application In mold Topcoat Viscosity / poises Thix. Index Gel time / min (on 200gr mass, at 20°C, 1% MEKP 50) Density

Spray • 120-170 > 4 10-20 1,25
Brush • 400-450 > 4 10-20 1,25
Spray • 90-150 > 4 10-20 1,25
Spray • 120-170 > 4 10-20 1,25
Spray • 120-170 > 4 25-30 1,25
Brush • 400-450 > 4 10-20 1,25
Brush • 400-450 > 4 25-30 1,25

 

Eurogel GCP / GCTC 600 Series 100% isophtalic

Specialty Composites

Applications : Marine, Sanitary and Kitchen wares, Industrial, Transortation, Building.

Special formulation to answer the most demanding outdoor end product requirements. High properties of hydrolysis resistance.

Reference

Eurogel GCP-612
Eurogel GCP-611
Eurogel GCP-622
Eurogel GCP-621
Eurogel GCTC-612
Eurogel GCTC-611
Eurogel GCTC-622
Eurogel GCTC-621

Application In mold Topcoat Viscosity / poises Thix. Index Gel time / min (on 200gr mass, at 20°C, 1% MEKP 50) Density Cured base resin properties
Tensile strength
Mpa		 Tensile modulus
MPa		 Flexural strength
Mpa		 Flexural modulus
MPa		 Elongation at break
%		 HDT / °C

Spray • 120-170 > 5 15-20 1,1 80 3300 130 3400 4 90
Spray • 120-170 > 5 25-30 1,1 80 3300 130 3400 4 90
Brush • 400-450 > 5 15-20 1,1 80 3300 130 3400 4 90
Brush • 400-450 > 5 25-30 1,1 80 3300 130 3400 4 90
Spray • 120-170 > 5 15-20 1,1 80 3300 130 3400 4 90
Spray • 120-170 > 5 25-30 1,1 80 3300 130 3400 4 90
Brush • 400-450 > 5 15-20 1,1 80 3300 130 3400 4 90
Brush • 400-450 > 5 25-30 1,1 80 3300 130 3400 4 90

 

Eurogel HQ-212 / HQ-212 TC Series Iso-NPG

Applications : Marine, Swimming-pool, Spa, Industrial, Transportation, Building. Very high resistance to hydrolysis, UV radiations, and in marine environment.

Reference

Eurogel HQ-212
Eurogel HQ-211
Eurogel HQ-222
Eurogel HQ-221
Eurogel HQ-212 TC
Eurogel HQ-211 TC
Eurogel HQ-222 TC
Eurogel HQ-221 TC

Application In mold Topcoat Viscosity / poises Thix. Index Gel time / min (on 200gr mass, at 20°C, 1% MEKP 50) Density (± 0,5)

Spray • 120-180 > 5 20-30 1,3
Spray • 120-180 > 5 35-45 1,3
Brush • 350-500 > 5 20-30 1,3
Brush • 350-500 > 5 35-45 1,3
Spray • 120-180 > 5 20-30 1,3
Spray • 120-180 > 5 35-45 1,3
Brush • 350-500 > 5 20-30 1,3
Brush • 350-500 > 5 35-45 1,3

 

Eurogel GCP 800 Series 100% vinylester

Applications : Moulds, tanks

Good resistance to temperature and chemical products. High gloss and hardness. Standard colours : green, black, transparent.

Reference

Eurogel GCP-812
Eurogel GCP-811

Application In mold Topcoat Viscosity / poises Thix. Index Gel time / min (on 200gr mass, at 20°C, 1% LPT) Density (± 0,5) Cured base resin properties
Tensile strength Mpa Tensile modulus MPa Flexural strength Mpa Flexural modulus MPa Elongation at break % HDT / °C

Spray • 120-170 > 5 10-15 1,1 72 3600 130 3700 2 135
Spray • 120-170 > 5 15-30 1,1 72 3600 130 3700 2 135

 

Eurogel — Specific Topcoats

Answer specific Top Coating requirements

Applications : Marine, Transportation, Building, Wind-, Tank- and Other industries…

(Refer to Eurogel 500, 600, HQ and 800 for our standard topcoats)

Reference

Eurogel GCTC-312
Eurogel GCTC-313
Eurogel GCTC-1201
Eurogel LP-TC 1201
Eurogel GCTC-10089

Comments Application Mold Topcoat Viscosity / poises Thix. Index Geltime / min (on mass) Density (± 0,5)

Very High surface tension. Satin/Gloss surface finish. High covering power.Possible to apply with one coat only according to support surface quality.Also possible to apply with 2 coats without sanding between layers. Brush/Roller • 230-280 > 5 13-20(2% PMEC50, at 20°C on 200gr) 1,2
Higher reactivtiy version of GCTC-312. Brush/Roller • 230-280 > 5 8-15

(2% PMEC50 at 20°C on 200gr)

 1,2
Higher covering power. Possible to apply with only one coat. Satin/Gloss surface finish. Air release additive included. High cost/performance ratio. Brush/Roller • 170-250 2,5-4 35-45

(1% PMEC50, at 20°C on 200gr)

 1,5
Long gel time, higher thix index, superior covering power. Only one coat possible. Satin/Gloss surface finish. Air release additive included. High cost/performance ratio. Brush/Roller • 170-250 3-5 50-70 (2% PMEC50, at 23°C, on 100gr) 1,35
Top Coat with anti skid properties (sand) for truck flooring construction. High covering power and abrasion resistance. Brush/Roller • 300-500 4-6 10-15 (2% PMEC50, at 23°C on 200gr) 1,38

 

Eurogel — Products for repairs / High thixotropic paste

Applications : all industries- Marine, Sanitary, Swimming-Pool, Transportation, Building, Wind, Tank (For in mold repair application, refer to Eurogel 500, 600, HQ and 800 brush versions ranges)

Reference

Eurogel GCRTC
Eurogel HQRTC
Pate FT-711 Incolore

Comments Application Mold Topcoat Viscosity / poises Thix. Index Geltime / min (at 20°C, on 200 gr mass, 1% of PMEC50) Density (± 0,5)

High viscosity top coat. Fairing putty based on iso resin for finishing repair job. Good mechanical properties. High gloss. Brush/Spatula • 3000-6000 > 7 15-20 1,1
High viscosity top Coat. Fairing putty based on isoNPG resin for finishing repair job. Good mechanical properties, high gloss. Brush/Spatula • 5000-10000 >8 — 1,3
High thixotropic paste. Specially developped to increase polyester gel coat thixotropy for making it usable by hand application (eg. Joint plane). High water resistance and gloss and color retention. Brush/Spatula • 5000-10000 > 7 30-60 1,1